Radiolink R9DS, 2.4G 9 channel receiver, DSSS and FHSS spread spectrum working simultaneously, use with Radiolink transmitters AT9, AT9S and AT10.
Radiolink R9DS, 2.4G 10 channel receiver, DSSS and FHSS spread spectrum working simultaneously, use with Radiolink transmitters AT9, AT9S and AT10.
SBUS and PWM also work at the same time!
Two signal Modes:
PWM signal output mode:red LED indicates PWM signal output, 9 channels in total. SBUS signal output mode: blue/purple LED indicates SBUS signal output, 10 channels in total. SBUS and PWM signal can work at the same time with SBUS signal output mode. CH9 output SBUS signal, the original CH1 to CH4 output CH7 to CH10 PWM signal at the same time.
Changing SBUS and PWM Mode :
Short press the ID SET switch two times within 1 second, the signal is changed from normal PWM to SBUS. The red LED indicates the normal PWM and blue/purple LED indicates SBUS signal.
Binding:
Place the transmitter and the receiver close to each other, within 1 meter. Turn on the transmitter, then power on the R9DS. There is a black button on the R9DS, use a thin stick press the button twice in two seconds and release, receiver light start blinking, after about 8 times blinking, match code success when receiver signal LED always on!
Specification
Channels: 10 (9 channels using PWM signal and 10 channels using SBUS and PWM simultaneously.) Working voltage: 4.8-10V Working current: 38-45mA(input voltage: 5V) Size: 43*24*15 MM Telemetry Integration using PRM-01 or PRM-02. 4096 precision, 0.25us per section.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Estimate shipping
Refund Policy
You have the right to cancel within 7 working days after the day you take receipt of goods. You must notify us within this time that you wish to cancel. You are required to take good care of the goods and return them to us at your own cost within 30 days. Your product must be complete, unused and in ‘as new’ condition (e.g. if you have opened the box to examine the product you must have done so without damaging or marking the product in any way). It should be returned with the original box, packing and accessories. If the returned item is in a condition which does not enable us to resell as new, we reserve the right to make a charge from any refund to cover this cost. We recommend that goods are returned by recorded or insured delivery. If you would like to phone our despatch department we can arrange to have the item(s) picked up. We will subtract the return cost from your refund. No refund will be provided for lost goods being returned to us, as this is the responsibility of the sender. We cannot cancel your purchase when: • The seal is broken on any software in the case of a simulator. Special Orders - If the goods were a special order that we do not have in stock and have had to order specially - If you cancel we reserve the right to charge a restocking fee of 10%. If we send a substitute without first checking that the substitute is acceptable then consumers are not expected to pay return carriage costs. These rights are in addition to those relating to faulty or misdescribed goods. If goods are returned as faulty, generally we will provide a replacement. If the item is of a ‘ready to go’ type model eg. Helicopter, plane, car etc. the item will be sent back to the supplier for a decision to be made in respect of a refund or replacement. Only then will a decision be made