Description
PLEASE NOTE CAMERA IS NOT INCLUDED
Flying a multirotor is pretty awesome, but recording your flight to play back later is even more awesome! If you already own a GoPro you’re half way there… combine it with this 3 axis brushless gimbal are you will be ready to record stunning cinematic video in no time.
There is no contest between the quality of aerial video taken with a 3 axis verses a 2 axis gimbal, but up until now 3 axis gimbals have been reserved for larger cameras and more powerful multirotors. The DYS Smart changes this. It's one of the first 3 axis GoPro brushless gimbals on the market and in our opinion the best! Not only that but it also includes the brand new mini AlexMos controller, which runs the widely respected BaseCam SimpleBGC software. The added 3rd axis not only provides superior stabilisation, but also allows you to fly the camera not just the multirotor!
What’s so fantastic about this brushless gimbal is that it comes ready to use out of the box - preloaded with firmware and setup by Flying Tech! All that’s required is mounting the gimbal to your multicopter, using either the supplied 10mm rail mount hooks or the spacers to directly bolt it to your frame. What’s more the gimbal will also fit the DJI Phantom without any modifications to the fitting bracket.
The wiring is also plug and play. The gimbal is supplied with a female JST connector, which can be plugged straight into one of our 3S balance port adapters to make powering the DYS Smart from your flight battery quick and easy. If you wish to control the gimbal remotely, the mini Alexmos controller provides a handy 5V to power a receiver.
The gimbal will come preconfigured with the 3rd axis set in 'follow mode'. This means the gimbal will follow the forward facing direction of the airframe but smooth out disturbances and movement when yawing the copter. This configuration is recommended for a single operator. The gimbal can also be setup to be controlled by a second handset, for full control of 2 axes and different operating modes.
The gimbal controller comes with the AlexMos 2.3 firmware pre-installed – after testing we don’t yet recommend version 2.4. However, as the board is an officially authorized version, it can be permanently upgraded with future firmware revisions.
If you plan on flying FPV using this gimbal with a GoPro you will require a Video Out Cable.
Please note: While the gimbal comes setup ready to go, we recommend conducting an accelerometer and gyro calibration before use. You may also need to optimise its PIDs to suit your style of flying - parameter setting requires patience and experience, but there are plenty of tutorials and guidance online to help.
Fully compatible with the new GoPro 4
Carbon Fibre 2-4s LiPo Battery Mount 13cm x 3cm
ailable on special order, please contact us. Alternative product Tarot T4 - 3D.
Flying a multirotor is pretty awesome, but recording your flight to play back later is even more awesome! If you already own a GoPro you’re half way there… combine it with this 3 axis brushless gimbal are you will be ready to record stunning cinematic video in no time.
There is no contest between the quality of aerial video taken with a 3 axis verses a 2 axis gimbal, but up until now 3 axis gimbals have been reserved for larger cameras and more powerful multirotors. The DYS Smart changes this. It's one of the first 3 axis GoPro brushless gimbals on the market and in our opinion the best! Not only that but it also includes the brand new mini AlexMos controller, which runs the widely respected BaseCam SimpleBGC software. The added 3rd axis not only provides superior stablisation, but also allows you to fly the camera not just the multirotor!
What’s so fantastic about this brushless gimbal is that it comes ready to use out of the box - preloaded with firmware and setup by Flying Tech! All that’s required is mounting the gimbal to your multicopter, using either the supplied 10mm rail mount hooks or the spacers to directly bolt it to your frame. What’s more the gimbal will also fit the DJI Phantom without any modifications to the fitting bracket.
The wiring is also plug and play. The gimbal is supplied with a female JST connector, which can be plugged straight into one of our 3S balance port adapters to make powering the DYS Smart from your flight battery quick and easy. If you wish to control the gimbal remotely, the mini Alexmos controller provides a handy 5V to power a receiver.
The gimbal will come preconfigured with the 3rd axis set in 'follow mode'. This means the gimbal will follow the forward facing direction of the airframe but smooth out disturbances and movement when yawing the copter. This configuration is recommended for a single operator. The gimbal can also be setup to be controlled by a second handset, for full control of 2 axes and different operating modes.
The gimbal controller comes with the AlexMos 2.3 firmware preinstalled – after testing we don’t yet recommend version 2.4. However, as the board is an officially authorized version, it can be permanently upgraded with future firmware revisions.
If you plan on flying FPV using this gimbal with a GoPro you will require a Video Out Cable.
Please note: While the gimbal comes setup ready to go, we recommend conducting an accelerometer and gyro calibration before use. You may also need to optimise its PIDs to suit your style of flying - parameter setting requires patience and experience, but there are plenty of tutorials and guidance online to help.
Fully compatible with the new GoPro 4
Related Products
Carbon Fibre 2-4s LiPo Battery Mount 13cm x 3cm
ailable on special order, please contact us. Alternative product Tarot T4 - 3D.
Flying a multirotor is pretty awesome, but recording your flight to play back later is even more awesome! If you already own a GoPro you’re half way there… combine it with this 3 axis brushless gimbal are you will be ready to record stunning cinematic video in no time.
There is no contest between the quality of aerial video taken with a 3 axis verses a 2 axis gimbal, but up until now 3 axis gimbals have been reserved for larger cameras and more powerful multirotors. The DYS Smart changes this. It's one of the first 3 axis GoPro brushless gimbals on the market and in our opinion the best! Not only that but it also includes the brand new mini AlexMos controller, which runs the widely respected BaseCam SimpleBGC software. The added 3rd axis not only provides superior stablisation, but also allows you to fly the camera not just the multirotor!
What’s so fantastic about this brushless gimbal is that it comes ready to use out of the box - preloaded with firmware and setup by Flying Tech! All that’s required is mounting the gimbal to your multicopter, using either the supplied 10mm rail mount hooks or the spacers to directly bolt it to your frame. What’s more the gimbal will also fit the DJI Phantom without any modifications to the fitting bracket.
The wiring is also plug and play. The gimbal is supplied with a female JST connector, which can be plugged straight into one of our 3S balance port adapters to make powering the DYS Smart from your flight battery quick and easy. If you wish to control the gimbal remotely, the mini Alexmos controller provides a handy 5V to power a receiver.
The gimbal will come preconfigured with the 3rd axis set in 'follow mode'. This means the gimbal will follow the forward facing direction of the airframe but smooth out disturbances and movement when yawing the copter. This configuration is recommended for a single operator. The gimbal can also be setup to be controlled by a second handset, for full control of 2 axes and different operating modes.
The gimbal controller comes with the AlexMos 2.3 firmware preinstalled – after testing we don’t yet recommend version 2.4. However, as the board is an officially authorized version, it can be permanently upgraded with future firmware revisions.
If you plan on flying FPV using this gimbal with a GoPro you will require a Video Out Cable.
Please note: While the gimbal comes setup ready to go, we recommend conducting an accelerometer and gyro calibration before use. You may also need to optimise its PIDs to suit your style of flying - parameter setting requires patience and experience, but there are plenty of tutorials and guidance online to help.
Fully compatible with the new GoPro 4
Related Products
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Refund Policy
this time that you wish to cancel. You are required to take good care of the goods and return them to us at your own
cost within 30 days. Your product must be complete, unused and in ‘as new’ condition (e.g. if you have opened the box
to examine the product you must have done so without damaging or marking the product in any way). It should be
returned with the original box, packing and accessories. If the returned item is in a condition which does not
enable us to resell as new, we reserve the right to make a charge from any refund to cover this cost. We
recommend that goods are returned by recorded or insured delivery. If you would like to phone our despatch department
we can arrange to have the item(s) picked up. We will subtract the return cost from your refund. No refund will be
provided for lost goods being returned to us, as this is the responsibility of the sender.
We cannot cancel your purchase when: • The seal is broken on any software in the case of a simulator.
Special Orders - If the goods were a special order that we do not have in stock and have had to order
specially - If you cancel we reserve the right to charge a restocking fee of 10%.
If we send a substitute without first checking that the substitute is acceptable then consumers are not expected to
pay return carriage costs.
These rights are in addition to those relating to faulty or misdescribed goods.
If goods are returned as faulty, generally we will provide a replacement. If the item is of a ‘ready to go’ type model eg.
Helicopter, plane, car etc. the item will be sent back to the supplier for a decision to be made in respect of a refund or
replacement. Only then will a decision be made