Multiplex FunJet
from Multiplex
ARTF Electric Model

Wingspan 795 mm, Overall fuselage length 750 mm, All-up weight min. 550 g, Wing loading 5 g/dm2

Multiplex have continued the tradition of introducing exciting jet style designs with the latest Funjet. This model has been designed from the outset to be powered by a brushless motor and lithium polymer batteries. The model provides high speed thrills with excellent low speed handling.

 

An agile, easy-to-launch fun jet which can take a wide variety of power systems. The FunJet is tailor-made for upgrading. The model is intended for experienced model flyers, e. g. for pilots who can handle a TwinJet or similar without a problem. The FunJet is controlled with ailerons, elevator and throttle, and aerobatics such as rolls, inverted flight, loops etc. are well within its capabilities. Fast, low passes in formation with 3, 4, 5 or even more models look simply terrific - and the sound is marvellous!

Then chop the throttle and be ready for a surprise - the FunJet glides in wonderfully slowly under full control to a gentle landing.

 

• Typical jet-like flying characteristics

• Aileron / elevator and throttle controls

• Compact layout for ease of transport

• Screw-fitting motor installation, infinitely variable motor thrustline

• Short building time: no workshop required

• Requires normal cyano adhesive and activator for construction.

 

Kit contents:

• Moulded parts for centre section, outboard wing panels, fins, small items, decals, motor mount and comprehensive instructions.

 

Recomended power set up and RC requirement:

Power min. Himax 2825-2700

Propeller MPX 5.5 x 4.5”

Flightpower EVO25 2500 11.1v Lipo.

Functions Aileron / elevator (delta mixer), throttle

Designed for 2 x Nano S servos or similar 9g units.

 

Please note that the kit does not include a power system, and this will have to be purchased separately.

 

The FunJet is also available in an RR version that is supplied largely factory built with a pre-installed powerset and servos.

 

The FunJet RR contains:

• Model with all moulded parts

• 2 Nano-servos installed

• 1 Himax 2825-2700 motor, factory-fitted and wired

• 1 MULTIcont BL-37 speed controller, connected to the motor

• Decal sheet

• Instructions

 

The FunJet RR requires the following work to complete:

- attach wings and fins to fuselage

- install your receiver and flight battery

- apply the decals, fit the propeller, check and balance the FunJet. 

 

 

The FunJet power set contains the following:

Himax HA 2825-2700 motor

Multiplex BL 37 speed controller

APC 5.5 x 4.5” propeller with 3.2 mm prop driver