Esky V3 Lama Co-Axial
from ESKY
Contra Rotating Electric Helicopter Ready to Go with Radio

Main rotor diameter: 340mm, Weight: 215g, Length: 360mm, Power system: 2 x 180 motor, Transmitter: 4ch, 4 in 1 controller containing gyro, mixer, ESC and receiver, 2 x 8g servos.

E SKY have utilised the very latest progressive product designs available to produce the V3 Lama. The co-axial rotors and ingenious design create a helicopter that will give you the very best learning tool available to master the skill of radio control helicopter flying. Once your skills have been developed the model can be flown virtually anywhere, indoor or out (in calm conditions) in a safe area. More experienced pilots utilise the stable characteristics of this model to master nose in flight and other manoeuvres that require its stable platform.

The V3 Lama is very tough, but not unbreakable, so when the inevitable happens we can offer a full range of spares (listed separately)

The V3 Lama features and benefits from:

* The Lama V3 uses tested quality drive, power and control systems.

* The V3 Lama possesses amazing hovering stability and has already led vast numbers of pilots around the world into successful RC flight.

* The model is powered by the latest technology lithium polymer battery (7.4v 800mAh) and is supplied with an extremely versatile lithium charger that can be operated from the mains (240v) via a small plug in transformer (supplied) or 12v from a battery supply. The charger features twin outputs for both 7.4v or 11.1v and charges via the small balance lead that safely charges the battery. Charge time is approximately 1 hour with a depleted pack.

*Supplied with an excellent 4 channel twin stick 35Mhz transmitter on mode 2 (throttle left) with an LED voltage indicator. The transmitter has moulded ergonomic grips and a charging socket (for use with optional nicad batteries). The transmitter is supplied with 8 x AA dry cell batteries to get you flying in the shortest possible time. The transmitter also features interchangeable crystals for channel freedom.

* Supplied with a spare pair of upper and lower blades.

The V3 Lama is supplied with the following:

1 x Lama helicopter ready assembled with all electronics installed

1 x 4ch transmitter

8 x 1.5v AA Dry cell batteries

1 x 7.4v 800mAh Lithium Polymer battery

1 x Mains adaptor

1 x Lithium charger

1 x 12v power lead

4 x Rotor blades