Gemini
from Multiplex
ARTF Elapor Foam Biplane
Wingspan 920 mm, Overall fuselage length 920 mm, All-up weight approx. 840 g, Wing area approx. 34 dm², Wing loading (FAI) min. approx. 22 g / dm²
Right from the earliest days biplanes have held a very special position in the history of aviation.
Even today this layout is very popular, especially for aircraft which are required to combine agility, relatively low wing loading and compact dimensions.
The distinctive biplane “look” also attracts many modellers to these aircraft, but in many cases they are frightened off by the considerable extra complexity compared to “normal” models.
Not so with our Gemini ELAPOR® model, which is quick to build, fast to rig, and available at a very reasonable price - even with the brushless power set. In comparison with models of “classic” construction, it is downright inexpensive. The dedicated Gemini power set, # 33 2634, gives the model a very lively performance, making it capable of all aerobatic manoeuvres with the exception of 3-D. Typical flight times with a 2000mAh battery are around 10 - 12 minutes.
The Gemini features:
• The model’s flying characteristics are good-natured, and its ground handling at take-off and landing are exemplary.
• The landing speed is low.
• The model can be dismantled in just one minute, so it is easy to transport even where space is very limited. However, most cars can carry the model “in one piece”.
• The Gemini is designed to accept various motors and battery types.
• The biplane can be completed either with an enclosed cabin or a simple windscreen.
• The top surface of the wings does not feature moulding “pimples”. Instead the wings have that characteristic “rib and fabric covering” look of full-size biplanes.
• The Gemini is equipped with streamlined wheel spats which are quite practical for take-off and landing on grass strips.
• The undercarriage is robust, but is designed to absorb hard landing shocks. It can easily be straightened after a hard landing, making the model ready for the air again without delay.
• The steerable tailwheel provides effective directional control at take-off, and accurate taxiing when manoeuvring on the ground.
• RC functions: Rudder, elevator, aileron, throttle
Kit contents:
Moulded ELAPOR® components
Wheel spats, wheels
Spinner
GRP spar
Small items, linkage components
Decal sheet
Comprehensive illustrated instructions
The model requires a 4 channel radio with 4 x Multiplex Nano-S servos or similar. The model has been designed for a brushless motor and LiPo battery. Multiplex offer a brushless power set for this model including a Himax HC2816-0890 or an upgrade tuning set for high performance including the Himax C3516-1130 brushless motor. These items are not included in the kit and are required to complete the model.
