Saito FG-36 w/Muffler/Ignition & Motor Mount
from Saito

Four Stroke Petrol Engine

The FG-36 is a new departure for Saito - a 36cc petrol engine! The Saito FG-36 is supplied with a CE approved electronic ignition system and a purpose made aluminium engine mount. The carburettor employs a diaphragm pump for reliable fuel feed in any attitude - even the wildest of 3D stunts! This also means that it is not sensitive to the position of the fuel tank, which allows the tank to be positioned to maximise the CG position. You can use forecourt quality petrol mixed in a ratio of 20-30:1 petrol to oil. The FG-36 is very clean running and is very economical.

 

Key Features:

4-stroke petrol engine from one of RC's top brands

36cc displacement rivals similarly sized 2-strokes

Includes: Ignition, Muffler, Walbro Carburettor & Motor Mount

Built for the utmost in reliability and performance

Brings Saito experience to gas enthusiasts

Comparable in power to Saito FA-220 glow 4-stroke

Available in traditional silver case

 

Specification:

Type: 4 Stroke Gasoline Engine

Displacement: 2.20 cu in (36 cc)

Bore: 35mm (1.49 in)

Stroke: 32mm (1.26 in)

Cylinders: Single

Total Weight: 66.2 oz (1760g) Motor, Mount, Muffler, and Ignition

Engine (Only) Weight: 48.2 oz (1252 g)

Muffler Weight: 3.0 oz (86 g)

Crankshaft Threads: 8 x 1.25mm (Step up is 10mm)

Benchmark Prop: APC 18 x 6W @ 8,300 rpm

Prop Range: 18"-19" x 8"-9”, 20" x 8" (Bolly or Mejzlik)

RPM Range: 1,700 - 9,000 rpm

Fuel: Gas oil mix of 20-30: 1 (20:1 for break in)

Mounting Dimensions: 7" x 2 5/8" x 6 5/16" (124mm x 85mm x 173mm

Muffler Type: Cast

HP: 3.5

Cylinder Type: Ringed

Starting System: Saito Ignition 4.8v - 6v (capacity more than 1,000mA

Carburettor Type: Walbro/Saito

Crank Type: Ball Bearing