E-Flite Blade CX3 MD 520N Helicopter
from E-flite

ARTF Electric Semi Scale Helicopter

 

Just like its predecessor, the Blade CX3 offers first-time heli pilots exceptional stability and incredible control through the coaxial, counter-rotating head design and 3-in-1 control unit. In addition, this CX3 also features two feather-light S60 Super Sub-Micro servos that provide full cyclic movement of forward, backwards and side-to-side manoeuvrability. The Blade CX3 also includes a heading lock gyro to provide better control and locked-in performance. The heading lock gyro also makes learning to fly much easier for beginners. It also makes more advanced manoeuvres easier due to constant pirouette rate with stick position. As with other co-axial Blade helicopters, no flying experience is required to begin your heli flight experience with the Blade CX3. This indoor helicopter is 100% factory-assembled, test flown and with the exception of a DSM2 transmitter, is ready to fly out of the box.

 

MD 520N® is a registered trademark or trademarks of MD Helicopters Inc. and is used under license to Horizon Hobby, Inc.

Available as BNF or Complete.

The Blade® CX3 MD 520N® Bind-N-Fly gives pilots unbelievable micro-heli excitement. The CX3 is perfect for the pilot that already owns a Spektrum DSM2 transmitter (including the LP5DSM transmitter included with the Blade CX2). It’s also covered in the licensed MD 520N scale body with an attractive police trim scheme.

Key Features:

Advanced 3-in-1 control unit including main motor ESCs, mixer and heading lock gyro

The heading lock gyro in the CX3 offers incredible hold and control to maximize your flight experience.

Two feather-light S60 Super Sub-Micro servos—just 6.0 grams each

2S 7.4V 800mAh Li-Po battery pack with charge protection circuitry

DC Li-Po balancing charger and AC Adapter

Compatible with all aircraft transmitters and modules equipped with Spektrum DSM2 technology

Spektrum™ AR6100e 2.4GHz DSM2™ receiver included–just bind to your DSM2 transmitter and fly!

Coaxial, counter-rotating rotor blades that make hovering easy for first-time pilots

100% factory-assembled, test-flown and ready-to-fly right from the box

Compatible with most Blade CX2 option parts

 

Specifications:

Main Rotor Diameter: 13.6 in (345mm)

Gross Weight: 8.0 oz (227g)

Length: 16.4 in (415mm)

Motor Size: 180 Brushed (2 included)

Kit/ARF/RTF: BNF

Control System: Any 2.4 DSM2 Equipped Aircraft Transmitter