At many slopes and flat-field flying sites you will find dozens of flying wings. These models are usually cut from various grades of foam and stiffened with parcel tape. The Xeno is a superior version: more elegant, of higher technical quality, and offering loads of convenience as well as excellent flying fun.
When designing the Xeno we made good creative use of the possibilities of 3-D CAD / CAM techniques and modern foam moulding technology. The result is an interesting shape with an unmistakable appearance.
For ease of transport the Xeno can simply be folded together in a few seconds, and in this state it can be carried safely and conveniently in a rucksack or similar.
Rigging the model for launch also takes just a few seconds, and converting it to electric power and back is almost equally rapid.
With its simple construction and high level of pre-fabrication it only takes two or three hours to assemble the Xeno (i.e. one evening - it really doesn’t count as construction!)
The plus points:
• Requires just a simple radio control system with delta mixer
• Numerous high-quality injection-moulded plastic parts provide interesting detail solutions
• Strong and rigid without the need for "taping" - thanks to ELAPOR® construction
• Removable / replaceable fins
• The finished model can be folded together, making it very easy to transport
• Good-natured flying characteristics, simple to fly (great for beginners), stall-proof
• Broad speed range - a genuine fun-flyer!
• Optional electric power set: fitted in seconds.
• Optional transport bag with strap attachment (# 76 3317)
Kit contents:
Moulded ELAPOR® and plastic parts, small items, decal sheet and instructions
Specification:
Wingspan: 1245 mm
All-up weight, glider / electric approx.: 395 g / 460 g
Total surface area: 32 dm²
Wing loading: 12.5 to 14.5 g/dm²
RC functions: Elevator, aileron (delta mixer), optional throttle
Equipment required
4 channel Radio with 2 Tiny MG servos and 5 or 6 channel light receiver
1 x Xeno Tuning power set # 33 2655
1 x Li-Batt BX 3/1- 950 flight battery also required
Power drive "Xeno TUNING" Set 332655
For highly skilled model pilots who just can’t get enough of a good thing - this set is designed for absolute maximum performance, giving you great aerobatics and vertical climbing ability. Fit this power set and you will always have your nose in front of your mates.
Current drain with 3S LiPo and the supplied 10" x 6" folding propeller: approx. 20 A
Contents:
1 Himax C 2816-1220 brushless motor # 33 3017
1 MULTIcont BL-30 S-BEC speed controller # 7 2289
2 9" x 6" folding propeller blades # 73 3492
1 35 mm Ø spinner, blade holder and driver # 73 3504
1 Canopy, for use with the power set # 22 4109
1 Power set fairing # 22 4108
1 Set of small parts and plastic parts for power set # 22 4111
1 Motor shaft extension with collet (for motor shaft Ø 3 and 4 mm) # 73 3505
Available Zip up Carry bag see below
