ST Model Cessna 350 ARTF
from ST Models
ARTF Semi Scale Electric

A model based on one of the prettiest modern light aircraft in the world today. The ST Model Cessna 350 combines graceful elegance with spritely performance and forgiving manners.
Those complex, curvy lines are accurately moulded in the tried and tested ST Model EPO moulding technique to give a 'ding' resistant finish combined with a smooth surface that readily accepts the stunning decal colours. The tinted canopy, wheel spats and fully sprung noseleg are the finishing touches that ST Model have become famous for. When you add in the amazing 'Fowler' type flaps and lights set, the Cessna 350 becomes an irresistable package that appeals to all levels of pilot skill beyond the basic trainer.

Power comes courtesy of a 1320kv brushless, outrunner motor and an 30A ESC which are factory installed and ready to be hooked up to a 1600/1800mAh 3 cell Li-Po of your choice. The four 9G servos are also supplied and fitted and merely need to be connected to your receiver.

As the model requires no glue, just one screwdriver will have her ready to fly in 15 minutes. OK, adding the decals may take a little longer, but you might not want to wait!!    

Specification
Wingspan: 1435mm (56.5in)  -  Length: 970mm (38.2in)  -  Weight:  980g (34.57oz)  -  Servos: 4 x 9g (Included)  -  Wing Loading:  44g/dm2 -  Wing Area 22.3dm2 (346sq.in)
    
Electric Motor included:  Brushless Outrunner 1320kv(Inc)
Speed Controller included:  30A (Included)
   
Requires:-
LiPo Recommended:  3S Intellect 1600mAh 25C required
Radio System:    5 Channel Required


Radio equipped version also available with ST 2.4GHz Tx & Rx