The digiSOUND5m is the new marine sound module from Mtroniks Ltd. It is the worlds first 100% waterproof, plug n play sound module designed to take the hassle out of giving your model a realistic sound! no programming or set up, it comes with a realistic sound pre-installed. All engine sounds are derived from real boats and transferred to the 16-bit replay technology inside the digisound sound module. leaving just the installation to complete before you can get under way! The unit comes complete with built in amplifier, wiring loom and even a 75.0mm diameter waterproof speaker!
You simply install the unit in your model and go! There is no complicated PC interface to deal with or complicated set up. Add this to the legendary Mtroniks waterproof construction and you really don't need to look any further!
The digiSOUND sound module for model boats will operate between 6.0 and 12.0V
Sound effect: Small Diesel Tug
Detailed specification of module and speaker
Module power output: 5 Watts RMS @ 12V (4 ohms), distortion typically 0.1%
Speaker rating: 2.5 Watts RMS (8 ohms), It is possible to run 2 speakers in parallel
Notes on speaker performance.
The 75.0mm speaker included with your module is waterproof so it is safe to use in your model boat, you should always install your speaker into a suitable enclosure (somewhere in the upper surface of the hull) to ensure the best power handling, frequency and bass response.
Please note this unit will require some soldering
Also available Large Multi Cylinder Air Start Diesel