●Designed with calm control and high stability ideal for newcomers to R/C.
●Compatible with both EP and GP power sources.
●No gluing required for completion.
●Pre-covered in printed film for a vivid color scheme.
●Aluminum pipe pins join the main wing halves that can be separated for easy transport.
●Vertical fin, servo bed, ailerons and rudder are all pre-installed.
●Can be flown with 4-cell 14.8V Li-Po battery power.
●Lightweight balsa fuselage structure provides energetic flight performance.
●Features rudder connected steering nose wheel.
●Equipped with pre-installed flexible pipe for rudder and elevator linkage rods.
●Pre-assembled fuel tank installed.
●Includes stylishly painted cowl for EP version. Creates different impression to the GP version.
●Spinner, linkage parts set and lightweight foam tires are included.
Requirement to Run (NOT INCLUDED)
＜Required for operation＞
●4ch, 4servo+ESC(EP) or 5 servo(GP) RC system for airplane
●600-1000W backplate mounted outrunner brushless motor(EP)
●2 cycle 40-46 engine(GP)
●100mm Y extension cord x 1 or aileron(EP/GP)
●200mm extension cord x 2 for aileron
●14.8V 4,000-5,000ｍAh Li-Po battery (Max Dimension: L150xW48xH58mm)(EP)
●Battery charger with Li-PO balance charging feature(EP)
●Fuel, engine starting tool(GP)
●Battery for receiver(EP/GP)
: If the battery cannot use the ESC BEC power, a separate Rx battery unit is required.(EP)
: (EP) 2,650g (GP) 2,550g
■Motor(EP): 600-1000W class backplate mounted outrunner brushless (sold separately)
(GP): 2-cycle 40-46 class (sold separately)
(EP): 14.8V 4,000-5,000ｍAh Li-Po (sold separately)
■Wing Area: 44dm2
: Original semi-symmetrical
: D11xP7-D12xP8 (sold separately)