All the parts necessary to build your very own workhorse of the skies! All parts come individually bagged, and require assembly to complete the finished model.
Just add, your own Tx/Rx combo, battery and charger, 4 x 9g servos and you're away.
Eye-catching in its bright semi-scale color scheme, the Ares Crusader II not only looks right, it’s been designed to fly right.
Perfectly placed to take the complete beginner from tentative first hops to basic aerobatics and beyond, a close look at the airframe and the well-appointed powertrain will have experienced pilots raising a wry smile in approval. From its classic Clark-Y high-lift wing and fully symmetrical stabilizer section, through the stable, high ground clearance, trike undercarriage layout, to the roomy fuselage and resilient EPO foam construction, this is an airplane that puts function and form on an equal footing, as a look inside will confirm.
(Video above shows RTF version)
Here, the powerful 750kV brushless outrunner and 40A Electronic Speed Controller - coupled to a stock 3S 2200mAh Li-Po (not included) - are perfectly suited to the ample 12 x 8” propeller, resulting in enough power to tackle that crucial training function, yet perform aerobatics with ease. As a beginner, you’ll immediately appreciate the Crusader’s docile and forgiving flight envelope, while those with experience will delight in its versatility and outstanding performance. The Ares Crusader II is, quite simply, the perfect one-stop solution to grass-roots training and progression to basic aerobatics.
Required to complete (not included):
3S 11.1v 2200mah LiPo battery
4 x 9g servo
Suitable LiPo charger
Transmitter and Receiver
Wing chord: 218mm (8.6”)
Wing area: 464sq. in.
Wing loading: 13oz / sq. ft
Length: 942mm (37”)
Weight: 1152g (40.6oz)
Battery: 3S 11.1V 2200mAh LiPo (Not included)
Motor: 750kV brushless
ESC: 40A brushless
Min Wing Spar
Vertical Tail Fin
Control Snakes with Links
Prop.12 x 8