EnErG Pro B-85 SBEC ESC (85A) (2-6 Cells) 4404952

RRP £81.99 £72.99

Availability: Out of stock

Note: Delivery costs are calculated at checkout depending on destination and order contents. Click for More Information

Be the first to review this product

Quick Overview

Supports high RPM motors,can be used with most of the motors in the rc market
Contact Us




  • Output :Continuous Current 85A, Burst Current 100A for 10 seconds
  • Battery Cell :5-18NC/2-6Lipo
  • Weight :60g
  • BEC Output :5.0V,5.5V,6.0V adjustable/5A
  • Size :34x46x13mm(LxWxH)


  • Supports high RPM motors,can be used with most of the motors in the rc market
  • Secondary sub-menu setting ,is easier to be programmed
  • Adjustable BEC output 5.0V/5.5V/6.0V and Continuous 5A current (supplies the Servo with much stronger power)
  • Advanced Governor Mode ( has the B-Series ESC to keep the motor speed even though the load is changed)
  • More optional motor timing Setup and soft acceleration start ups ( make the motors run smoothly)
  • Super smooth and accurate throttle linearity
  • Power arming protection (prevents the motor from accidentally running when switched ON)
  • Auto throttle shut down in signal lose situation
  • Safety thermal over-load protection, when the temperature of ESC exceeds 110 deg C,the ESC will reduce the output power to allow it to cool
  • Use new generation of the MOSFET to ensure ESC's heating low,supporting biggest Peak current and higher reliability
  • New Advanced programming software

BEC Output - 5.0-5.5 or 6.0v (ADJUSTABLE) At 5A
Continuous - 85A (Burst - 100A)
EnErG Pro B-85 SBEC
Lipo Cells - 2-6 (NiMH Cells - 5-18)
Program Card - 4404970
Programmable - Yes (Manually or by Program card not included)
Size - 34x46x13mm
Weight - 63g

Additional Information

Manufacturer EnErG