Brushless motor BOOST 60 Hanno Special C8725


The ideal brushless motor for the Hanno Prettner models Supra Fly 60, Curare 60 and other aerobatic models up to 1700mm wingspan or 4000g take-off weight.

High quality brushless motor BLDC (external rotor) for model aircraft. The BOOST motor series is the result of more than 15 years of experience in the field of modern electric drives.

product features
* Highest production quality
* Perfect ventilation through open housing design
* Using the best materials
* High temperature resistant neodymium magnets
* Extra large quality ball bearings

Area of ​​application - model / take-off weight
3D aerobatic models up to 3000g
Aerobatic models up to 3500g
Trainer up to 4000g
Sailors up to 4500g

Brushless Motor BOOST 60 "Hanno Special"
Mounting cross made of aluminum
prop adapter
mounting screws
Instructions German / English

Optional accessories (recommended)
Brushless controller XQ-70 "Hanno Special", # C8755
Programming Card XQ, # C3057
Propeller APC 13x10, # X7281 (@ 6S LiPo)
LiPo battery RED POWER 4500-6S, C9424

Note: Of course, other propellers (e.g., 3-blade or smaller sizes) may also be used. Likewise, batteries with others, e.g. higher capacity can be used. Please make sure that the permissible currents (A) are not exceeded. We recommend our proven POWER WATTS 150, # C7282 for easy current measurement. A device that you need again and again and should not be missing in any equipment.

Additional Information

Manufacturer Pichler
Motor Design Outrunner


Technical specifications
Dimensions = Ø 50mm / L 51mm
Weight = 345g
Shafts Ø = 6.0mm / internal thread M3
LiPo battery / cell count = 3 -6S
Idling speed per volt = 490 rpm (KV)
Max. Load 60s = 55A