MKS BLS980 Brushless Titanium Gear High Speed Digital Tail Servo BLS980

Details

the MKS BLS980 Brushless Titanium Gear High Speed Digital Tail Servo.

Additional Information

Manufacturer MKS
Servo Size Standard
Servo Gear Material Titanium
Servo Speed 0.00 sec/60°
Servo Torque 0.00 kg-cm

Specification

Dead band: 0.0004ms (Default)
Control System: +Pulse Width Control
Working frequency: 760μs/560hz
(RX) Required Pulse: 3.5 ~ 6.0 Volt Peak to Peak Square Wave
Operating Voltage: 4.0 ~ 6.0 V DC Volts
Operating Temperature Range: -10 to + 60 Degree C
Operating Speed (4.8V): 0.040 sec/60° degrees at no load
Operating Speed (6.0V): 0.033 sec/60° degrees at no load
Stall Torque (4.8V): 34.7 oz/in (2.5 kg.cm)
Stall Torque (6.0V): 43.0 oz/in (3.1 kg.cm)
360° Modifiable: NO
Motor Type: Brushless Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearings
Gear Type: Titanium Gears
Programmable: NO
Connector Wire Length: 24.0 cm (9.40")
Dimensions: 40x20x40mm (1.57x0.79x1.50")
Weight: 58.0g (1.97 oz)