Riviera Motor Boat Kit 400mm Laser Cut WBC1000

Details

Based on a classic open cockpit 4-seater the Riviera is a design that epitomises a classic wooden runabout of the 1930s and ‘40s. It drives well in most conditions, excels in calmer water and looks very much the part, displacing a satisfying bow wave and leaving a tidy wake.

The Wooden Model Boat Company prides itself on producing traditional model boat kits that build quickly and accurately into delightful semi-scale replicas, each as happy cruising on the lake as it is adorning the mantelpiece at home. Using precise laser-cut balsa and ply parts, coupled with a semi self-jigging / interlocking hull frame and easy to follow step-by-step instructions, success is practically guaranteed. Whether you plan to build the Riviera for two-channel radio control or static display the process is very similar as are the rewards.

Note: Below are suggested additions for this model which allow them to run. Please scroll to the bottom of the page to view them.
Batteries listed may be physically bigger than others.
Plugs may require changing to suit the model in reference to Speed Controllers.

Additional Information

Manufacturer No

Specification

What's in the Box

1x Laser-cut hull parts set.
1x Laser-cut deck parts set.
1x Laser-cut stand parts set.
1x Perspex windscreen.
1x 3D printed plastic seat set.
1x Deck magnet set.
1x Comprehensive instruction manual.

Needed to Complete

1x 280-size brushed motor.
1x 15A marine ESC.
1x Mini or micro servo.
1x 2-channel 2.4GHz transmitter and receiver combo.
1x 150 x 2mm threaded propeller shaft.
1x 33 x 22mm brass rudder.
1x 25mm x M2 brass propeller.
1x 7.3V 1100mAh LiPo battery & suitable charger.
1x Suitable glues, paints and building materials.

ADDITIONAL EQUIPMENT MAY BE REQUIRED.